
4 Handling
Drive Technology
12 Version: 1.5 AM3000 / AM3500
4 Handling
4.1 Transport
• Climate category: 2K3 according to EN 50178
• Transport temperature: -25 °C - +70 °C, max. fluctuation 20 K/hour
• Transport humidity: relative humidity 5% - 95%, non-condensing
• The servomotor may only be transported by qualified personnel and in the manufacturer's original recyclable
packaging.
• Avoid hard impacts, particularly at the shaft end.
• If the packaging is damaged, check the motor for visible damage. Inform the transport company and, if
necessary, the manufacturer.
4.2 Packaging
• Cardboard packaging with Instapak
®
foam cushion.
• You can return the plastic portion to the supplier (see Disposal)
Motor type Carton Max. stacking height
4.3 Storage
• Climate category 1K4 according to EN50178
• Storage temperature: -25 °C - +55 °C, max. fluctuation 20 K/hour
• Air humidity: relative humidity 5% - 95%, non-condensing
• Max. stacking height: see table Packaging
• Storage time: without limitation
• Store only in the manufacturer’s original recyclable packaging
4.4 Maintenance / Cleaning
• Maintenance and cleaning only by qualified personnel.
• The ball bearings have a grease filling with a service life of 20,000 hours under normal operating conditions.
The bearings should be replaced after 20,000 hours of operation under rated conditions.
• Check the motor for bearing noise every 2,500 operating hours or once per year. If any noises are heard,
stop the operation of the motor. The bearings must be replaced.
• Opening the motor invalidates the warranty.
• Clean the housing with isopropanol or similar.
Destruction of the servomotor
Never immerse or spray the servomotor.
Komentáře k této Příručce